Trang chủ » Các loại thiết bị dệt may

RS30 Rotor Spinning Machine (RIFA)

Spinning Machinery

HS Code:8445203100

CE

Basic Info.


HS Code:8445203100

Additional Info.

Advantages
1. Increase production. The speed of rotor is up to 100, 000RPM, Speed of guiding yarn reaches 170m/m
2.352 spin boxes can be available
3. Carrying out integrate channel to ensure the better sealing, decrease the unnecessary interruption during the fibre transport, which also assures the stable pressure to promote yarn quality

4. It is very easy to operation and replaces spin boxes
5. Lower energy consumption, 5-10% lowers than similar machines for power per ton yarn
6. High rate for finished products
7. Abundant optional: Waxing device, Keep tail device, Yarn Clear, overhead Blower.

Integrate self-sucking spin box perfectly combine multi-technology to get best quality of spinning. All focus on the following advantages:
1. Self-sucking, long passage, large capacity for remove impurity
2. The maximum rotor speed can be up to 100, 000RPM
3. Integrate channel ensures the better sealing and stability pressure
4. Non-cover cavum of opening roller can avoid the fibre or impurity accumulation.
5. Many parts of spin boxes are gotten through die-casting, which reduce the replacing parts quantity and improve the unanimity of the spin boxes
6. Many kinds and series of units enlarge the range of yarn, and increase the range of material
7. Series standard units enlarge the spinning range and yarn range
8. It is easy to disassemble and install the rotor, opening roller, withdraw nozzles and other key parts without any tools.

Semiautomatic piecing device is used to do the preparation before the piecing, such as worker should finish lift creel, find out yarn end, cleaning spin box, etc. But for yarn feeding, yarn sink, yarn draft, and winding are completed instantaneously by the device, which is constituted by the lever device, electro-magnet and high precision time controller device. The unique combination of electromechanical components ensures the time error of piecing less than 0.01 second. This advantages are as following:

1. The piecing can be completed even speed over 60000R. P. M and keep good quality
2. Only one minute training, operator's piecing quality can meet the standard
3. The quality of piecing can't be affected cause of different operators
3. Success ratio of piercing is more than 95%
5. The strength of the piecing does not affect the following procedures Semi-auto doffing system:
6. Conveyor belt can be used as the temporary store for doffing; While bobbin is full, it is conveyed to the tail side of the machine.

Reliable impurity collection system:
1. Backward and forward running waste conveyer belt & cleaning cart can completely remove the spin box waste, reduce labor intensity, and improve spinning condition

Strong trash system
1. Spin box use strong trash system, and more efficiency for fiber and waste separate, Improve yarn quality & qualified ratio

Lower energy consumption
1. Through long time experience comparation, power consumption is lower of the same type
Electronic controlling system: Adopting loop-locked technical & intelligent controlling system:
1. Parameter display (rotor speed, opening roller speed, yarn drawing speed, feeding speed, traverse speed, yarn length, shift production)
2. Spinning technology parameters display (draft ratio, negative pressure)
3. Semi-automatic piercing technology parameters display
4. It is easy to set or edit technique parameters
5. Technological parameter info management can save huge parameters
6. Photoelectric sensor for yarn broken changed to non-contact measure, better anti-pollution and operational reliability
7. Emergency off device to avoid accidents
8. Adopt remote computer system to realize network management by control PLC systems and machines running
9. Inverter control for Opening roller speed, yarn drawing speed, feeding speed and traverse speed, convenience for technological parameter adjustment
10. Negative pressure alarm device can avoid yarn defects cause by whole machine negative pressure decline.

  Technical Specification
 
Items Unit Technology data
RFRS30
Yarn count range tex(Ne) 120~6(5~36)
Range of rotor speed r/min 30000-100000
To ± - diameter Series mm Φ 33, Φ 38, Φ 42, Φ 50, Φ 54
Range of fibre length mm < 40
Opening roller speed r/min 5000~1000,
Sliver count range Tex(g/5m) 5000~3000(15~25)
Maximum winding speed m/min 170
Draft range   32~220
Twist range T/M 200~2250
Pitch of spin boxes mm 216
MAX Spin boxes rotor 288
Per Spin boxes rotor 16
Dimension of cylinder tube mm Φ 54x170
Cone   4° 20′ , 2°
Maximum mm Φ 300x150
Maximum weight of yarn package Kg ≈ 4.5
Can dimension mm Φ 400x900, Φ 350x914
Pressure Pa 5000~9000
Noise dB < 85
Total motor power rating Kw 83
Total exhausted air M3/h 6210

C th? b?n quan tm

Product Description

Advantages
1. Increase production. The speed of rotor is up to 100, 000RPM, Speed of guiding yarn reaches 170m/m
2.352 spin boxes can be available
3. Carrying out integrate channel to ensure the better sealing, decrease the unnecessary interruption during the fibre transport, which also assures the stable pressure to promote yarn quality

4. It is very easy to operation and replaces spin boxes
5. Lower energy consumption, 5-10% lowers than similar machines for power per ton yarn
6. High rate for finished products
7. Abundant optional: Waxing device, Keep tail device, Yarn Clear, overhead Blower.

Integrate self-sucking spin box perfectly combine multi-technology to get best quality of spinning. All focus on the following advantages:
1. Self-sucking, long passage, large capacity for remove impurity
2. The maximum rotor speed can be up to 100, 000RPM
3. Integrate channel ensures the better sealing and stability pressure
4. Non-cover cavum of opening roller can avoid the fibre or impurity accumulation.
5. Many parts of spin boxes are gotten through die-casting, which reduce the replacing parts quantity and improve the unanimity of the spin boxes
6. Many kinds and series of units enlarge the range of yarn, and increase the range of material
7. Series standard units enlarge the spinning range and yarn range
8. It is easy to disassemble and install the rotor, opening roller, withdraw nozzles and other key parts without any tools.

Semiautomatic piecing device is used to do the preparation before the piecing, such as worker should finish lift creel, find out yarn end, cleaning spin box, etc. But for yarn feeding, yarn sink, yarn draft, and winding are completed instantaneously by the device, which is constituted by the lever device, electro-magnet and high precision time controller device. The unique combination of electromechanical components ensures the time error of piecing less than 0.01 second. This advantages are as following:

1. The piecing can be completed even speed over 60000R. P. M and keep good quality
2. Only one minute training, operator's piecing quality can meet the standard
3. The quality of piecing can't be affected cause of different operators
3. Success ratio of piercing is more than 95%
5. The strength of the piecing does not affect the following procedures Semi-auto doffing system:
6. Conveyor belt can be used as the temporary store for doffing; While bobbin is full, it is conveyed to the tail side of the machine.

Reliable impurity collection system:
1. Backward and forward running waste conveyer belt & cleaning cart can completely remove the spin box waste, reduce labor intensity, and improve spinning condition

Strong trash system
1. Spin box use strong trash system, and more efficiency for fiber and waste separate, Improve yarn quality & qualified ratio

Lower energy consumption
1. Through long time experience comparation, power consumption is lower of the same type
Electronic controlling system: Adopting loop-locked technical & intelligent controlling system:
1. Parameter display (rotor speed, opening roller speed, yarn drawing speed, feeding speed, traverse speed, yarn length, shift production)
2. Spinning technology parameters display (draft ratio, negative pressure)
3. Semi-automatic piercing technology parameters display
4. It is easy to set or edit technique parameters
5. Technological parameter info management can save huge parameters
6. Photoelectric sensor for yarn broken changed to non-contact measure, better anti-pollution and operational reliability
7. Emergency off device to avoid accidents
8. Adopt remote computer system to realize network management by control PLC systems and machines running
9. Inverter control for Opening roller speed, yarn drawing speed, feeding speed and traverse speed, convenience for technological parameter adjustment
10. Negative pressure alarm device can avoid yarn defects cause by whole machine negative pressure decline.

  Technical Specification
 
Items Unit Technology data
RFRS30
Yarn count range tex(Ne) 120~6(5~36)
Range of rotor speed r/min 30000-100000
To ± - diameter Series mm Φ 33, Φ 38, Φ 42, Φ 50, Φ 54
Range of fibre length mm < 40
Opening roller speed r/min 5000~1000,
Sliver count range Tex(g/5m) 5000~3000(15~25)
Maximum winding speed m/min 170
Draft range   32~220
Twist range T/M 200~2250
Pitch of spin boxes mm 216
MAX Spin boxes rotor 288
Per Spin boxes rotor 16
Dimension of cylinder tube mm Φ 54x170
Cone   4° 20′ , 2°
Maximum mm Φ 300x150
Maximum weight of yarn package Kg ≈ 4.5
Can dimension mm Φ 400x900, Φ 350x914
Pressure Pa 5000~9000
Noise dB < 85
Total motor power rating Kw 83
Total exhausted air M3/h 6210

Sản phẩm cùng loại :