Basic Info.

Standard:Iso 9000-2000
HS Code:84454090

Additional Info.

High Speed continuous tape dyeing machine
(Continuous Narrow Fabric Dyeing Machine)
Technical Requirements Description

Ribbon/Lace Input Device- 1 set
Input Wheel- 1 set
Tape/Ribbon Sub branch device-4 PCS
Drived Motor ---(AC Motor: 0.5 HP)
Input Tape Width: 200 mm 0.5HP
Dying Slot Device
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
PU Roller ( Up and Down) ----- each 1 PC
PU Roller ( Middle) -----1 PC
Button Cylinder ---2 PCS 1HP
Steamer
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
Steamer Size: Length X Width X Height: 2140mm× 700mm× 2150mm
One steamer has 45 m lace/tape travese/travel distance
Two sets steamers heat mode: Electronic heat and steam heat
Dying Polyester Tape/Lace, using High Degree Temperature electronic Heat
Dying Nylon Tape/Lace, using steam heat
Steamer with 2 PCS of temperature sensors, 2 PCS Thermometer, the protection of high degree temperature, steamer temperature controll one thermometer
The surface of steamer have 1 PC steamer mechnical thermometer
Through 2HP motor, inventor controled, Sprocket connection Transmission
1 PC electronic Solenoid controll steamer with 4 PCS of
Sub-Branchs
Steam through Pipeline indirect make heat, the top of steamer case has one input and output place
2HP
Washing Device, with 3 sets of washing cheese, first one is cold water
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
Washing cheese is made by stainless
Each washing cheese has 2 PCS roller with diameter 100mm X 200mm
Through Air pressure controll the rollers, every 2 sets of washing cheese drived by 2HP motor, total 2 group
3 PCS of washing cheese each have water Intake and Overflow nozzle, have 2 PCS with steam direct make heat, and with 2 PCS Thermostats
Guide shaft Through motor drived chain transmission
Every two washing cheese through 1 group tension device controlled 2HP
Sizing Device-1 set
PU Rubber Roller 2 PCS diameter 100 mm X 200 mm
Roller Through Air pressure controlled, with 1 PCS sizing slot

Stainless Drying Cheese Device-2 sets
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
Hot/iron cheese diameter 570mm X Length 500 mm 2 PCS, can around lace /tape 3 times, spray Teflon in the surface, heated by electrocity
2 HP motor drived, 1 group tension controlled
The top have pressure roller, one side is fixed and the other side is level
And can adjustable
Aluminum
Isolation tape seperated device shelf -1 set 1HP
Tape/Lace tightening roller device ----1 set
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
Tape/Lace tightening roller diameter 100 mm X 200 mm, through cylinder controlled, drived by 0.5 HP motor
2 PCS of tape /lace tightening nozzle device
Electrostatic devices 0.5HP
Control cabinet- 1 set
Digital temperature controller, speed controller and tension controller
Machinery covered space: 6800cm× 1200cm× 2150cm
Machine effective usage Width: 200 mm, one time can pass 1-2 lace/tapes, the speed is: 0-30 /minute
Working TemperatureWhole Case

Total Power: 5.25KW +(25KW when dying polyester high degree temperature)

Customer Need Ready Accessory:
Air Compressor
1. Air Compressor -2 HP
2. Boilers: 50kgs
3. Regulator
4. All steam pipeline, water pipeline and electronical wire

Product Description

High Speed continuous tape dyeing machine
(Continuous Narrow Fabric Dyeing Machine)
Technical Requirements Description

Ribbon/Lace Input Device- 1 set
Input Wheel- 1 set
Tape/Ribbon Sub branch device-4 PCS
Drived Motor ---(AC Motor: 0.5 HP)
Input Tape Width: 200 mm 0.5HP
Dying Slot Device
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
PU Roller ( Up and Down) ----- each 1 PC
PU Roller ( Middle) -----1 PC
Button Cylinder ---2 PCS 1HP
Steamer
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
Steamer Size: Length X Width X Height: 2140mm× 700mm× 2150mm
One steamer has 45 m lace/tape travese/travel distance
Two sets steamers heat mode: Electronic heat and steam heat
Dying Polyester Tape/Lace, using High Degree Temperature electronic Heat
Dying Nylon Tape/Lace, using steam heat
Steamer with 2 PCS of temperature sensors, 2 PCS Thermometer, the protection of high degree temperature, steamer temperature controll one thermometer
The surface of steamer have 1 PC steamer mechnical thermometer
Through 2HP motor, inventor controled, Sprocket connection Transmission
1 PC electronic Solenoid controll steamer with 4 PCS of
Sub-Branchs
Steam through Pipeline indirect make heat, the top of steamer case has one input and output place
2HP
Washing Device, with 3 sets of washing cheese, first one is cold water
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
Washing cheese is made by stainless
Each washing cheese has 2 PCS roller with diameter 100mm X 200mm
Through Air pressure controll the rollers, every 2 sets of washing cheese drived by 2HP motor, total 2 group
3 PCS of washing cheese each have water Intake and Overflow nozzle, have 2 PCS with steam direct make heat, and with 2 PCS Thermostats
Guide shaft Through motor drived chain transmission
Every two washing cheese through 1 group tension device controlled 2HP
Sizing Device-1 set
PU Rubber Roller 2 PCS diameter 100 mm X 200 mm
Roller Through Air pressure controlled, with 1 PCS sizing slot

Stainless Drying Cheese Device-2 sets
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
Hot/iron cheese diameter 570mm X Length 500 mm 2 PCS, can around lace /tape 3 times, spray Teflon in the surface, heated by electrocity
2 HP motor drived, 1 group tension controlled
The top have pressure roller, one side is fixed and the other side is level
And can adjustable
Aluminum
Isolation tape seperated device shelf -1 set 1HP
Tape/Lace tightening roller device ----1 set
(2 sets controlled by tension, dying elastic tape/lace controlled by balance
Hammer, dying non-elastic lace/tape controlled by Cylinder tension shelf )
Tape/Lace tightening roller diameter 100 mm X 200 mm, through cylinder controlled, drived by 0.5 HP motor
2 PCS of tape /lace tightening nozzle device
Electrostatic devices 0.5HP
Control cabinet- 1 set
Digital temperature controller, speed controller and tension controller
Machinery covered space: 6800cm× 1200cm× 2150cm
Machine effective usage Width: 200 mm, one time can pass 1-2 lace/tapes, the speed is: 0-30 /minute
Working TemperatureWhole Case

Total Power: 5.25KW +(25KW when dying polyester high degree temperature)

Customer Need Ready Accessory:
Air Compressor
1. Air Compressor -2 HP
2. Boilers: 50kgs
3. Regulator
4. All steam pipeline, water pipeline and electronical wire